.....The Monitor

The inspiration of this monitor was my Dell Monitor that I use with my home computer

To the create the monitor I began with a rectangular shape and filleted the edges. This was then extruded up by converting the shape in to an editable poly. This was the beginning point of the monitor and would be the base. On top of this base shape I created a a box and this would be where the monitor stand would be connected to. Again this was converted in to an editable poly, I then selected the back edge and chamfered this a few times to created a rounded edge.



To create the main part of the stand, I again made a small box and converted this in to a editable poly. I then extruded the top face and moved it at an angle to create the first part of the stand. The other parts of the stand were created by again extruding faces and moving them into place.

To create the monitor a face from the stand was extruded slightly and then the outside face was scaled up to the size of the screen. A frame for the screen wa then made and the edges where chamfered to create the main part of the screen.

Now all that needed to be done was to create the label for the monitor along with the buttons. I did the buttons by simply creating a cyclinder shape and then converting to an editable poly. Then chamfered the edges to give the top of the buttons a more rounded feel.

The logo was created using the line tool. I just created the shape of the logo and then extruded this out.